Sign In | Join Free | My himfr.com
Home > X2 Safety Capacitor >

Self Healing MPX X2 Capacitor 2.0 Uf Withstanding Surge Voltage

    Buy cheap Self Healing MPX X2 Capacitor 2.0 Uf Withstanding Surge Voltage from wholesalers
     
    Buy cheap Self Healing MPX X2 Capacitor 2.0 Uf Withstanding Surge Voltage from wholesalers
    • Buy cheap Self Healing MPX X2 Capacitor 2.0 Uf Withstanding Surge Voltage from wholesalers

    Self Healing MPX X2 Capacitor 2.0 Uf Withstanding Surge Voltage

    Ask Lasest Price
    Brand Name : CG
    Model Number : X2-185K-275VAC
    Certification : VDE,CQC
    Price : Discuss
    Payment Terms : T/T
    Supply Ability : 100000000 Pieces
    Delivery Time : 15-21 work days
    • Product Details
    • Company Profile

    Self Healing MPX X2 Capacitor 2.0 Uf Withstanding Surge Voltage

    Good Self-Healing Properties 2.0uf 185K 125VAC X2 Safety Withstanding Surge Voltage Stressing​

    The X2 series of film capacitors are mainly used for EMI suppression by connecting the L/N of the power input, and used in parallel with the input port. The advantages are as follows:
    1. This capacitor is very stable, with little change over time and stability, so the input is not easily affected by environmental factors.
    2. Unlike other types of ceramic capacitors, the capacitance of film capacitors is less affected by voltage. An X7R ceramic capacitor has a capacitance change of 40% between 0V and 50% of the applied voltage.
    3. Unlike most types of capacitors, film capacitors have a very low dissipation factor. This means that very little heat is generated when AC current flows through the film capacitor. The X7R capacitor converts 10% of the current flowing through it into heat, while the film capacitor is less than 0.1%.
    X2 Safety Capacitor.pdf

    Marking

    1. CIGU logo:
    2. Capacitance:(104K ,0.1μF)
    3. Capacitance Tolerance:(K)±10%
    4. Rated Voltage:250,275,300,305,310VAC 5. Product Class:X2
    6. Product type: MPX
    7. Climatic Category: 40/110/56
    8. Passive Flammability Class:B
    9. China approvals mark:CQC
    10. Germany approvals mark:VDE
    11. ENEC approvals mark:ENEC
    12. American approvals mark:CUL
    13. Approval standard:IEC60384-14

    NO.

    Main Materials

    Specification

    Remark

    1

    Metallized polypropylene Film

    MPPZAH or MPPA(5~12μm)

    ---

    2

    Zn,Sn line

    Zn or Zn and Sn alloy

    ---

    3

    Terminal

    Cu(Copper wire) (Φ0.55 or 0.75mm)

    ±0.05mm

    4

    Sealed Material

    Epoxy resin

    UL94-V0

    5

    Plastic Case

    PBT

    UL94-V0


    Features
    1.This is specifically designed for applications in serial with the 100Vac-240Vac main, i.e. capacitive divider, for example,energy meter, LED driver etc.
    2.Metallized polypropylene film
    3.Good self-healing properties, withstanding surge voltage stressing
    4.Long stability of capacifance
    5.Good properties in damp environment
    6.Excellent active and passive flame resistant abilities

    Construction and main materials of products


    Specifications(IEC 60384-14)

    Test itemsPerformance requirementsConditions of test
    CapacitanceWithin the tolerance specified1KHz, 1Vrms Max. at 25℃
    Dissipation Factor0.001 (0.1%) Max.1KHz, 1Vrms Max. at 25℃
    Voltage proofShall be no abnormalityBetween terminals 4.3UR (Vdc) Test of 60sec.
    Between terminal and enclosure UR×200%+1500Vac, 60sec.
    Insulation resistanceCR ≤ 0.33μF IR ≥ 15,000MΩ CR >0.33μF IR ≥6,000s100±15Vdc, 60sec / 25℃
    Robustness of terminationsNo wire breakage and no damage of capacitor

    Tense Strength of Terminal Load Force : 1.0 Kg
    Holding Time : 10 ± 1sec

    Bending Strength of Terminal Load Force : 0.5 Kg
    Bending Time : 4 x 90 ゚

    Resistance to soldering heat

    (1) Appearance : No visible damage
    (2) △C/C : ≤ ±5% of the initial value

    Solder temperature: 260±5℃
    Solder time: 5±0.5sec

    Solderability95% of the surface tinning

    Solder temperature: 260±5℃
    Solder time: 2±0.5sec

    Rapid change of temperatureThe capacitors shall be visually examined and there shall be no visible damage.

    Lower category temperature: -40℃
    Upper category temperature: 110℃
    Number of cycles: 5
    Duration t1 = 30 min

    VibrationThe capacitors shall be visually examined and there shall be no visible damage

    Frequency range: 10~55Hz
    Course: X,Y,Z (axis)
    2h / axis ( 6h in total)
    Displacement amplitude: 0.75mm


    Test itemsPerformance requirementsConditions of test
    Climatic sequence

    (1) Appearance : No visible damage
    (2) △C/C : ≤ ±5% of the initial value
    (3) DF ( tanδ) : ≤ 0.008 of increased value
    (4) IR : ≥ 50% of the applicable limits
    (5) Voltage proof : Normal

    Dry Heat
    Upper Temperature: 110℃
    Lower Duration: 16Hrs

    Cold
    Temperature: -40℃
    Duration: 2Hrs

    Damp Heat Steady State

    (1) Appearance : No visible damage
    (2) △C/C : ≤ ±5% of the Initial value
    (3) DF ( tanδ) : ≤ 0.008 of increased value
    (4) IR : ≥ 50% of the applicable limits
    (5) Voltage proof : Normal

    +40°C and 93% RH, 56 days
    Charge and discharge

    (1) Appearance : No visible damage
    (2) △C/C : ≤ ±10% of the initial value
    (3) DF ( tanδ) : ≤ 0.008 of increased value
    (4) IR : ≥ 50% of the applicable limits

    Test voltage : √2 x URVAC 50 Hz
    Charge and discharge: 0.5sec/time
    Repeated for 10000 cycles

    Endurance

    (1) Appearance : No Visible Damage
    (2) △C/C : ≤ ±10% of the initial value
    (3) DF ( tanδ) : ≤ 0.008 of increased value
    (4) IR : ≥ 50% of the applicable limits

    1.25 x UR VAC 50 Hz, once every hour
    increase to 1,000VAC for 0.1 second,
    1,000 hours at upper rated temperature


    Storage conditions
    1 t should be noted that the solderability of the terminals may be deteriorted when stored barely in an atmosphere for a long preriods
    2 It shouldn't be located in particularly high temperature and high humidity, it must submit to the following conditions(keeping in the original package)
    Temperature: 35 MAX Relative humidity:60% MAX
    3 Storage period:Losse:12 monthes max (from the manufacturing date marked on the label in package bag)
    Enviroment requirement
    1 Compliance with the requirement of RoHS.
    2 Compliance with the requirement of REACH.
    3 Without Halogen(as required).
    4 Please see the attachment 2 for the test reprots of the Rohs and Reach by a third party
    Quality Control

    Product structure​


















































































    Quality Self Healing MPX X2 Capacitor 2.0 Uf Withstanding Surge Voltage for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Dongguan Chenglue Electronic co.,Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)