Home > X2 Safety Capacitor >

125K 125VAC Capacitor 1.2 UF Withstanding Surge Voltage Stressing

Product Categories

X2 Safety Capacitor [63]
Y1 Safety Capacitor [41]
Y2 Safety Capacitor [14]
Metallized Polypropylene Film Capacitor [38]
Super Capacitor [29]
Metallized Polyester Film Capacitor [10]
MMKP82 Capacitor [22]
Aluminum Electrolytic Capacitor [24]
Metal Oxide Varistor [79]
SMD MOV Varistor [16]
NTC Thermal Resistor [65]
NTC Temperature Sensor [31]
Hall Effect Current Sensor [17]
Electric Vehicle Fuse [24]
Gas Discharge Tube [42]
LED Screen Power Supply [12]
Rainproof Power Supply [11]
High Voltage Fuse [88]
Ceramic Thermal Fuse [14]
Auto Blade Fuse [11]
PCB Mounted Fuse Holder [11]
Master Disconnect Switches [6]

Dongguan Chenglue Electronic co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

125K 125VAC Capacitor 1.2 UF Withstanding Surge Voltage Stressing

Ask Lasest Price
Brand Name :	CG
Model Number :	X2-125K-275VAC-F3
Certification :	VDE，CQC
Price :	Discuss
Payment Terms :	T/T
Supply Ability :	100000000 Pieces
Delivery Time :	15-21 work days

Add to Cart

Product Details
Company Profile

125K 125VAC Capacitor 1.2 UF Withstanding Surge Voltage Stressing

Good Self-Healing 1.2uf 125K 125VAC X2 Safety Capacitor Withstanding Surge Voltage Stressing
X capacitor --- metallized polypropylene film capacitor; usually, X capacitor is mostly made of polyester film capacitor with relatively large ripple current resistance. This type of capacitor has a large volume, but it allows a large current for instantaneous charge and discharge, and its internal resistance is correspondingly small. The X capacitor adopts the outer square and the inner high-voltage OPP (metallized polypropylene material winding processing) in plastic packaging. The OPP material not only has better electrical performance, but also can effectively reduce the impact of high-frequency pulses when connected in parallel with the input end of the power supply. Power effects.
X2 Safety Capacitor.pdf

Characteristics of X2 Safety Capacitors

Non-inductive construction with metallized polypropylene film.
Excellent moisture resistance.
self-healing.
Excellent flame retardant properties.
Capable of withstanding overvoltage shocks.

The use of X2 safety capacitors.

Suppresses electromagnetic interference.
Jumper the lines.
It is suitable for the resistance-capacitance step-down of ammeters, LED drivers, controllers, etc. in series in the circuit.

Marking

1. CIGU logo:
2. Capacitance:(104K ,0.1μF)
3. Capacitance Tolerance:(K)±10%
4. Rated Voltage:250,275,300,305,310VAC 5. Product Class:X2
6. Product type: MPX
7. Climatic Category: 40/110/56
8. Passive Flammability Class:B
9. China approvals mark:CQC
10. Germany approvals mark:VDE
11. ENEC approvals mark:ENEC
12. American approvals mark:CUL
13. Approval standard:IEC60384-14

NO.	Main Materials	Specification	Remark
1	Metallized polypropylene Film	MPPZAH or MPPA(5~12μm)	---
2	Zn,Sn line	Zn or Zn and Sn alloy	---
3	Terminal	Cu(Copper wire) (Φ0.55 or 0.75mm)	±0.05mm
4	Sealed Material	Epoxy resin	UL94-V0
5	Plastic Case	PBT	UL94-V0

Features
1.This is specifically designed for applications in serial with the 100Vac-240Vac main, i.e. capacitive divider, for example,energy meter, LED driver etc.
2.Metallized polypropylene film
3.Good self-healing properties, withstanding surge voltage stressing
4.Long stability of capacifance
5.Good properties in damp environment
6.Excellent active and passive flame resistant abilities

Construction and main materials of products

Specifications(IEC 60384-14)

Test items	Performance requirements	Conditions of test
Capacitance	Within the tolerance specified	1KHz, 1Vrms Max. at 25℃
Dissipation Factor	0.001 (0.1%) Max.	1KHz, 1Vrms Max. at 25℃
Voltage proof	Shall be no abnormality	Between terminals 4.3UR (Vdc) Test of 60sec.
Voltage proof	Shall be no abnormality	Between terminal and enclosure UR×200％+1500Vac, 60sec.
Insulation resistance	CR ≤ 0.33μF IR ≥ 15,000MΩ CR >0.33μF IR ≥6,000s	100±15Vdc, 60sec / 25℃
Robustness of terminations	No wire breakage and no damage of capacitor	Tense Strength of Terminal Load Force : 1.0 Kg Holding Time : 10 ± 1sec
Robustness of terminations	No wire breakage and no damage of capacitor	Bending Strength of Terminal Load Force : 0.5 Kg Bending Time : 4 x 90 ﾟ
Resistance to soldering heat	(1) Appearance : No visible damage (2) △C/C : ≤ ±5% of the initial value	Solder temperature: 260±5℃ Solder time: 5±0.5sec
Solderability	95% of the surface tinning	Solder temperature: 260±5℃ Solder time: 2±0.5sec
Rapid change of temperature	The capacitors shall be visually examined and there shall be no visible damage.	Lower category temperature: -40℃ Upper category temperature: 110℃ Number of cycles: 5 Duration t1 = 30 min
Vibration	The capacitors shall be visually examined and there shall be no visible damage	Frequency range: 10~55Hz Course: X,Y,Z (axis) 2h / axis ( 6h in total) Displacement amplitude: 0.75mm

Test items	Performance requirements	Conditions of test
Climatic sequence	(1) Appearance : No visible damage (2) △C/C : ≤ ±5% of the initial value (3) DF ( tanδ) : ≤ 0.008 of increased value (4) IR : ≥ 50% of the applicable limits (5) Voltage proof : Normal	Dry Heat Upper Temperature: 110℃ Lower Duration: 16Hrs
Climatic sequence		Cold Temperature: -40℃ Duration: 2Hrs
Damp Heat Steady State	(1) Appearance : No visible damage (2) △C/C : ≤ ±5% of the Initial value (3) DF ( tanδ) : ≤ 0.008 of increased value (4) IR : ≥ 50% of the applicable limits (5) Voltage proof : Normal	+40°C and 93% RH, 56 days
Charge and discharge	(1) Appearance : No visible damage (2) △C/C : ≤ ±10% of the initial value (3) DF ( tanδ) : ≤ 0.008 of increased value (4) IR : ≥ 50% of the applicable limits	Test voltage : √2 x URVAC 50 Hz Charge and discharge: 0.5sec/time Repeated for 10000 cycles
Endurance	(1) Appearance : No Visible Damage (2) △C/C : ≤ ±10% of the initial value (3) DF ( tanδ) : ≤ 0.008 of increased value (4) IR : ≥ 50% of the applicable limits	1.25 x UR VAC 50 Hz, once every hour increase to 1,000VAC for 0.1 second, 1,000 hours at upper rated temperature

Storage conditions
1 t should be noted that the solderability of the terminals may be deteriorted when stored barely in an atmosphere for a long preriods
2 It shouldn't be located in particularly high temperature and high humidity, it must submit to the following conditions(keeping in the original package)
Temperature: 35 MAX Relative humidity:60% MAX
3 Storage period:Losse:12 monthes max (from the manufacturing date marked on the label in package bag)
Enviroment requirement
1 Compliance with the requirement of RoHS.
2 Compliance with the requirement of REACH.
3 Without Halogen(as required).
4 Please see the attachment 2 for the test reprots of the Rohs and Reach by a third party
Quality Control

Product structure

Reference standards

GB-T2693-2001(IDT IEC 60384-1-2008)Fixed capacitors for use in electronic equipment –Part 1: Generic specification
GB-T14472-1988 Fixed capacitors for use in electronic equipment –Part 16:Sectional specification: Fixed metallized polypropylene film D.C. capacitor
IEC-60384-14-2005 Fixed capacitors for use in electronic equipment –Part 16:Sectional specification: Fixed metallized polypropylene film D.C. capacitor
GB-T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1: Sampling schemes indexed by acceptance quality limit (AQL)for lot-by-lot inspection (ISO 2859-1:1999, IDT)

Product Tags:


*From:	Your email address is incorrect!
*To:	Dongguan Chenglue Electronic co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!